User Manual

HDMI / Video Wall over IP with PoE

IHD-200PT / IHD-200PR

Select "Use the following IP address".

IP address: You have to set the same network segment between your PC’s IP

and the transmitter / receiver.

Ex: If the transmitter’s IP is 169.254.0.157, then you should set 169.254.0.xxx

where xxx can be any number between 2 and 253. (same as receiver)

Subnet mask: Enter 255.255.0.0.

6. If necessary, you may enter “Advanced” to add more that one IP address.

Generally, except for updating firmware, you only need to set the same network

segment between your PC’s IP and the transmitter to configure all the receivers.