User Manual

HDMI / Video Wall over IP with PoE

IHD-200PT / IHD-200PR

The products and programs described in this User’s Manual are licensed products of

PLANET Technology, This User’s Manual contains proprietary information protected by

documentation are copyrighted.

No part of this User’s Manual may be copied, photocopied, reproduced, translated, or

reduced to any electronic medium or machine-readable form by any means by electronic or

mechanical. Including photocopying, recording, or information storage and retrieval systems,

for any purpose other than the purchaser's personal use, and without the prior express

written permission of PLANET Technology.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in all

environments and applications, and makes no warranty and representation, either implied or

expressed, with respect to the quality, performance, merchantability, or fitness for a

particular purpose.

PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET

disclaims liability for any inaccuracies or omissions that may have occurred.

Information in this User’s Manual is subject to change without notice and does not represent

a commitment on the part of PLANET. PLANET assumes no responsibility for any

inaccuracies that may be contained in this User’s Manual. PLANET makes no commitment

to update or keep current the information in this User’s Manual, and reserves the right to

make improvements to this User’s Manual and/or to the products described in this User’s

Manual, at any time without notice.

If you find information in this manual that is incorrect, misleading, or incomplete, we would

appreciate your comments and suggestions.

FCC Compliance Statement

This Equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CE mark Warning

The is a class A device, In a domestic environment, this product may cause radio

interference, in which case the user may be required to take adequate measures.