Datasheet

IGS-620TF
2
Adjustable 6-Port Switch Mode or 4 + 2 Fiber Redundant Mode
The two SFP slots allow to change the operation mode with its built-in DIP switch. Via
the built-in DIP switch, the IGS-620TF can be configured as 6-port Ethernet switch or
4+2 ber redundant mode. With the 6-port switch mode, the IGS-620TF can operate in
Store-and-Forward mechanism with high performance; on the other hand, when in the
4+2 fiber redundant mode, it provides rapid fiber redundancy of link for highly critical
Ethernet applications. The redundant mode also supports auto-recovering function. If the
destination port of a packet is link-down, it will forward the packet to the other port of
the backup pair.
Environmentally Hardened Design
The IGS-620TF is equipped with the slim-type IP30 metal case for easy deployment
in heavy Industrial demanding environments. With IP30 industrial case protection, the
IGS-620TF provides a high level of immunity against electromagnetic interference and
heavy electrical surges which are usually found on plant floors or in curb side traffic
control cabinets. Being able to operate under the temperature range from -40 to 75
degrees C, the IGS-620TF can be placed in almost any difficult environment. The
IGS-620TF also allows either DIN rail or wall mounting for efficient use of cabinet
space.
Convenient and Reliable Power System
To enhance the operation reliability and flexibility, the IGS-620TF is equipped with two
DC power input connectors for redundant power supply installation. It also possesses
an integrated power supply source with wide-ranging voltages (12 to 48V DC or 24V
AC) for worldwide high availability applications requiring dual or backup power inputs.
Industrial Case / Installation
• Slim IP30 metal case protection
• DIN Rail and Wall Mount Design
• Redundant Power Design
–
12 to 48V DC, redundant power with polarity
reverse protect function
–
AC 24V power adapter acceptable
• Supports EFT protection 6000 VDC for power line
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Location B
Site to Site Fiber Link Redundancy — ISP, Bank and Enterprise
Gigabit
Ethernet Switch
Gigabit
Ethernet Switch
Redundant
Industrial Switch
IGS-620TF
Redundant
Industrial Switch
IGS-620TF
Location A
1000Base-T UTP
1000Base-SX/LX Fiber-optic
1000
10Km
Primary Link
1000Base-X Fiber
(Forwarding)
Redundant Link
1000Base-X Fiber
(Disabled)
1000
10/100/1000Base-T UTP
10/100/1000Base-T UTP