Datasheet

IGS-10020HPT
5
Powerful Security
The IGS-10020HPT offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network
access by denying packets based on source and destination IP address, TCP/UDP ports or dened typical network applications. Its protection mechanism
also comprises of 802.1x Port-Based and MAC-Based user and device authentication. With the private VLAN function, communication between edge ports
can be prevented to ensure user privacy. The network administrators can now construct highly secured corporate networks with considerably less time and
effort than before.
Flexibility and Extension Solution
The two mini-GBIC slots built in the IGS-10020HPT support Dual-Speed, 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) ber-optic
modules, that means, the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the
transmission speed required. The distance can be extended from 550 meters (Multi-Mode ber) up to above 10/50/70/120 kilometers (Single-Mode ber or
WDM ber). They are well suited for applications within the enterprise data centers and distributions.
Perfect Integration Solution for Outdoor IP PoE Camera and NVR System
The IGS-10020HPT provides 8 10/100/1000Mbps 802.3at PoE ports and can offer sufcient PoE power for 8 PoE IP cameras at the same time. In addition,
with the 2-Port 100/1000Base-X SFP interfaces, the IGS-10020HPT can connect to core fiber switch and send video stream to NVR and monitor center.
Through the high performance switch architecture, the IGS-10020HPT facilitates the recorded video files from the 8 PoE IP Cameras to be saved in the
NVR systems. Furthermore, the NVR systems can be controlled and monitored both in the local LAN and the remote site via Internet. The IGS-10020HPT
undoubtedly brings an ideal secure surveillance system with lower total cost.