Datasheet

IGS-10020HPT

Management

• Switch Management Interfaces

− Console / Telnet Command Line Interface

− Web switch management

− SNMP v1 and v2c switch management

− SSH / SSL and SNMP v3 secure access

• Four RMON groups (history, statistics, alarms, and

events)

• IPv6 IP Address / NTP / DNS management

• Built-in Trivial File Transfer Protocol (TFTP) client

• BOOTP and DHCP for IP address assignment

• Firmware upload / download via HTTP / TFTP

• DHCP Relay

• DHCP Option 82

• User Privilege levels control

• NTP (Network Time Protocol)

• Link Layer Discovery Protocol (LLDP) Protocol

• Cable Diagnostic technology provides the

mechanism to detect and report potential cabling

issues

• Reset button for system reboot or reset to factory

default

• PLANET Smart Discovery Utility for deploy

management

Digital Input and Digital Output for external Alarm

The IGS-10020HPT supports Digital Input, and Digital Output on its front panel. This

external alarm enables users to use Digital Input to detect, log external device status (such

as door intrusion detector ), and send event alarm to the administrators. The Digital Output

could be used to alarm the administrators if the IGS-10020HPT port link down, link up or

power failure.

Robust Layer 2 Features

The IGS-10020HPT can be programmed for advanced switch management functions

such as dynamic Port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning

Tree protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP Snooping. The

IGS-10020HPT provides 802.1Q Tagged VLAN, and the VLAN groups allowed will be

maximally up to 255. Via aggregation of supporting ports, the IGS-10020HPT allows the

operation of a high-speed trunk combining multiple ports. It enables maximum up to 5

groups of 8 ports for trunking, and supports fail-over as well.

Efficient Management

For efficient management, the IGS-10020HPT Managed Ethernet Switch is equipped

with console, WEB and SNMP management interfaces. With the built-in Web-based

management interface, the IGS-10020HPT offers an easy-to-use, platform-independent

management and configuration facility. For text-based management, the IGS-10020HPT

can be accessed via Telnet and the console port. Moreover, it also offers secure remote

management via any standard-based management software by supporting SNMPv3

connection which encrypts the packet content at each session.