Datasheet

GTP-802 / GTP-802S / GTP-805A
2
Fiber-Optic Link Capability Extends the Range of Network Deployment
The maximum distance between the PoE PSE and PD is 100 meters. To extend the network device deployment range, the GTP-80x is integrated with Fiber
interface. The GTP-80x PoE+ Media Converter is used to convert optical Ethernet signal to electrical Ethernet signal that allows two segments to connect
easily, efciently and inexpensively. It can convert 10/100/1000BASE-T signal to 1000BASE-X one and provide the diverse options of ber connecting types
to meet different network applications.
The GTP-80x series and its ber connecting type includes:
• GTP-802: SC Fiber Interface with Multi-mode, Distance up to 220m and 550m
• GTP-802S: SC Fiber Interface with Single-mode, Distance up to 10km
• GTP-805A: LC Fiber Interface, supports Multi / Single Mode SFP module, Distance up to 120km max. (Varying on SFP module)
With the long Fiber distance support, it still sustains the transmission performance as high as 1000Mbps. It works in high performance Store and Forward
mechanism, and also can prevent packet loss with IEEE 802.3x Flow Control (Full-Duplex) and the LFP (Link Fault Pass through function) (LLCF/LLR)
with the DIP Switch design. Furthermore, it can immediately alarm the administrators over the issue from the link media and provide efficient solution to
monitoring the network power usage.
Quick and Easy High Power PoE Network Deployment
The GTP-80x series provides 52V DC power over Ethernet cables -- just insert DC voltage into Cat.5/5e/6 cable, allowing the cable between the PoE
splitters (POE-151S / POE-152S / POE-162S) to transfer data and power simultaneously for up to 100 meters. Then it will spilt the digital data and the power
into two kinds of selectable DC outputs (5V DC / 12V DC) or (12V DC / 24V DC). Thus, it reduces cables and the dedicated electrical outlets on the wall,
ceiling or any unreachable place. Most of all, it also eliminates the time for installation. The high Power over Ethernet solution frees the security IP camera
and wireless AP deployment from restrictions of power outlet locations.
Flexible and User-Friendly PoE Deployment
For the places difcult to nd the power outlet, the GTP-80x series provides the easiest way to power your Ethernet devices such as PLANET IEEE 802.3at /
IEEE 802.3af PoE splitter (POE-151S / 152S / 162S) and non PoE compliant Internet camera or wireless PoE access point. For instance, users can exibly
install the security IP camera, wireless access point and other IEEE 802.3at / IEEE 802.3af compliant network equipment around the corner in the public
areas such as station or freeway for surveillance demands, or build a wireless roaming environment on the campus or at the airport.
Product Application