Installation Guide

8
To check the current IP address or modify a new IP address for the Managed
Switch,pleaseusetheproceduresasfollows:
 DisplayofthecurrentIPaddress
1. On “GS-4210-24T4S#”prompt,enter“show ip”.
2.The screen displays the current IP address, subnet mask and gateway shown in
Figure3-4.
Figure 3-4: IP Information Screen
 CongurationoftheIPaddress
3. On “GS-4210-24T4S#”prompt,enter“congure”.
4. On “GS-4210-24T4S (cong)#” prompt, enter the following command and
press<Enter>asshowninFigure3-5.
GS-4210-24T4S(cong)# ip address 192.168.1.100 mask 255.255.255.0
GS-4210-24T4S(cong)# ip default-gateway 192.168.1.254
ThepreviouscommandwouldapplythefollowingsettingsfortheManagedSwitch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 3-5: Setting IP Address Screen