Installation Guide

6
3. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebook computer while the other end to RJ45 console port of the Managed
Switch.
RJ45 to RS232 Cable
Serial Port
115200,N,8,1
Managed Switch
Console
115200,N,8,1
PC / Workstation with
Terminal Emulation Software
Serial Port
Figure 3-1: Managed Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
Switch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
Baud:115200
Databits:8
Parity:None
Stopbits:1
Flowcontrol:None
Figure 3-2: COM Port Conguration