Datasheet

GS-4210-16UP4C
3
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System maintenance
–
Firmware upload/download via HTTP/TFTP
–
Conguration upload/download through web interface
–
Dual images
–
Hardware reset button for system reboot or reset to
factory default
• SNTP Network Time Protocol
• Cable diagnostics
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• SNMP trap for interface link up and link down notication
• Event message logging to remote Syslog server
• Four RMON groups (history, statistics, alarms and events)
• PLANET smart discovery utility
• Smart fan with speed control
PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental protection,
the GS-4210-16UP4C can effectively control the power supply besides its capability of
giving high watts power. The “PoE schedule” function helps you to enable or disable
PoE power feeding for each PoE port during specied time intervals and it is a powerful
function to help SMBs or Enterprises save power and money. It also increases security
by powering off PDs that should not be in use during non-business hours.
PoE Usage Monitoring
Via the power usage chart in the web management interface, the GS-4210-16UP4C
enables the administrator to monitor the status of the power usage of the connected
PDs in real time. Thus, it greatly enhances the management efciency of the facilities.
Environment-friendly, Smart Fan Design for Silent Operation
The GS-4210-16UP4C features a desktop-sized metal housing, a low noise design and
an effective ventilation system. It supports the smart fan technology that automatically
controls the speed of the built-in fan to reduce noise and maintain the temperature of
the PoE switch for optimal power output capability. The GS-4210-16UP4C is able to
operate reliably, stably and quietly in any environment without affecting its performance.
IPv6/IPv4 Dual Stack Management
Supporting both IPv6 and IPv4 protocols, the GS-4210-16UP4C helps the SMBs to step
in the IPv6 era with the lowest investment as its network facilities need not be replaced
or overhauled if the IPv6 FTTx edge network is set up.
Robust Layer 2 Features
The GS-4210-16UP4C can be programmed for advanced switch management functions
such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple
Spanning Tree Protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD
snooping. Via the link aggregation, the GS-4210-16UP4C allows the operation of a high-
speed trunk to combine with multiple ports, and supports fail-over as well. Also, the Link
Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic
information about neighboring devices on the local broadcast domain.
Power
On
Power
On
Power
On
Power
On
6 Watts 6 Watts 12 Watts 12 Watts
PoE
PoE PoE
PoE
Power
Off
Power
Off
Power
Off
Power
On
6 Watts 6 Watts 12 Watts 12 Watts
PoE
PoE PoE
PoE
PoE
1000Base-T UTP with PoE
Total consumption of 36 watts/hr
5PM8AM
5PM 8AM
Save 24 watts/hr during off-business hours
Total Saved = 10800 Watts/month
LACPMSTP
Q-in-Q LLDPQoS
MLD
IGMP
L2/L4
Managed Switch
L2/L4
Managed Switch