Datasheet

FTP-802
FTP-802S15
Data Sheet
1
Key Features
Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, •
100Base-FX, IEEE 802.3af Power over Ethernet standards
Auto-Negotiation for 10/100Base-TX Half Duplex mode or Full •
Duplex mode, Auto-MDI/MDI-X function on copper port
IEEE 802.3x Full Duplex Flow control and back pressure in Half •
Duplex eliminate packets loss
Provides DC 48V power over RJ-45 Ethernet cable to devices •
with Ethernet port
Auto-detect of PoE IEEE 802.3af equipments protects devices •
from being damaged by incorrect installation
100Base-FX interface for up to 2km (Multi-mode fiber •
50μm/125μm, 62.5μm/125μm) on FTP-802
100Base-FX interface for up to 15km (Single-mode fiber •
9μm/125μm) on FTP-802S15
DIP-switch: LFP (Link Fault Pass-through) mode selection•
Compact in size, easy installation•
LED indicators for easy network diagnose•
100Base-FX to 10/100Base-TX PoE Media Converter
segments to connect easily, efficiently and inexpensively. It can convert
10/100Base-TX signal to 100Base-FX signal and provides the diverse fiber
connecting types of options to meet different network applications. By
selecting models, the maximum networking distance can extend to as long
as 15 kilometers and still sustain the transmission performance as high as
100Mbps. It works in high performance of Store and Forward mechanism
and also can prevent packet loss with IEEE 802.3x Flow Control (Full-
Duplex). With the LFP (Link Fault Pass Through function),(LLCF/LLR) and the
DIP Switch design, it can immediately alarm administrators problems of the
link media and provide efficient solution to monitor the net. The DIP Switch
provides for disabling or enabling the LFP function.
Advantage of Combing PoE and Media Conversion
With the data, long reach fiber capability and PoE from one unit, the FTP-
80x shall reduce cables and eliminate the need for dedicated electrical
outlets on the wall, ceiling or any unreachable place. It frees the Security
IP Camera and wireless AP deployment from restrictions due to power
outlet locations. Power and data switching are integrated into one unit and
delivered over a single cable, eliminating costs for additional AC wiring and
reducing installation time.
More than a Fiber Media Converter and also can be a Power over
Ethernet Injector as well!
The best data link and power sourcing solution for long reach
network equipment
The PLANET FTP-80x series are the great ideal for remote network
equipment deployments; It integrated the below two networking
technologies:

Media Conversion: 100Base-FX to 10/100Base-TX

Power over Ethernet: Power Sourcing Equipment (PSE), PoE
Injector
Providing both PoE and Fiber Optical interfaces, the FTP-80x are ideal for
service providers, campuses and public areas requiring to deploy the PoE
for the wireless access points, IP-based surveillance cameras or IP phones
in any places easily, efficiently and cost effectively.
PoE Optimizes the Installation and Power Management of
Network Devices
IEEE 802.3af capabilities of FTP-80x reduce installation costs for many new
network productivity devices. As an IEEE 802.3af Power over Ethernet
Injector, FTP-80x provides DC 48V voltage over Ethernet cables. It allows
the twisted pair cable between the FTP-80x and IEEE 802.3af compliant
PD (Powered Device) or PoE Splitter (such as POE-151S-5V/12V) to transfer
data and power simultaneously.
Fiber-Optical Link Capability Extend the Range of Network
Deployments
The maximum distance from the PoE PSE to PD is 100 meters. To extend
the deployment range of network device, the FTP-80x are integrated with
Fiber interface. The FTP-80x PoE Media Converters are used to convert
optical Ethernet signal to electrical Ethernet signal that allows two type