User Manual

User’s Manual of FGSD-1022 Series

The page includes the following fields:

Object Description

Enable: Sets the Managed Switch to QinQ mode, and allows the QinQ tunnel port to

be configured.

Disable:

The Managed Switch operates in its normal VLAN mode.

QinQ

The default is for the Managed Switch to function in Disable mode.

QinQ TPID

The Tag Protocol Identifier (TPID) specifies the ethertype of incoming packets on a

tunnel access port.

 802.1Q Tag : 8100

 vMAN Tag : 88A8

Default : 802.1Q Tag.

Port QinQ

Check: Sets the Port to QinQ mode. Or the port operates in its normal VLAN mode.

Default: Un-check.

Check:

Configures IEEE 802.1Q tunneling (QinQ) for an uplink port to another device

within the service provider network.

QinQ Uplink

Cancel:

Configures IEEE 802.1Q tunneling (QinQ) for a client access port to segregate

and preserve customer VLAN IDs for traffic crossing the service provider

network.