User's Manual

4-2: Connect the ber cable. Attach the duplex LC

connector on the network cable to the SFP+

transceiver. Attach the ber cable from the XT-705A to

the ber network. TX, RX must be paired at both ends.

Step 5: When all the connections are all set and the LED lights

all show normally, the installation is complete.

3.2 Wall-mount Installation

Step 1: Please nd the wall that can mount the Media

Converter

Step 2: Screw two screws on the wall.

10GBASE-T to 10GBASE-X

XT-705A Switch Bottom Side

Ø7mm

Ø4mm

5V DC

Step 3: Hang the Media Converter on the screws from the wall.