- Planet Internet Broadband Router User's Manual

43
Parameters Description
Enable Protocol & Port Binding The “Protocol and Port Binding” function is default
disabled. You can select to enable the “Protocol and
Port Binding” function.
Source IP Range Only packets with this assigned source IP range will
statically bind to the assigned WAN port. If you assign
192.168.0.3 – 192.168.0.5, it means 3 IP addresses:
192.168.0.3, 192.168.0.4 and 192.168.0.5
Destination IP Range Only packets with this assigned destination IP range will
statically bind to the assigned WAN port. If you assign
192.168.02.3 – 192.168.0.5, it means 3 IP addresses:
192.168.0.3, 192.168.0.4 and 192.168.0.5
Source Port Range Only packets with this assigned destination IP range will
statically bind to the assigned WAN port.
Destination Port Range Only packets with this assigned destination port range
will statically bind to the assigned WAN port.
Protocol Only packets with this assigned protocol will statically
bind to the assigned WAN port.
WAN Port The WAN port that the packets matching this rule are
statically bound to.