- Planet Internet Broadband Router User's Manual

27
3.2 WAN
Use the WAN Settings screen if you have already configured the Quick Setup Wizard section and
you would like to change your Internet connection type. The WAN Settings screen allows you to
specify the type of WAN port connect you want to establish with your ISP. In the XRT-D’s WAN.
The WAN settings offer the following selections for the router’s WAN port, Dynamic IP, Static IP,
PPPoE, PPTP, L2TP, Telstra Big Pond, Qos, Policy, DNS and DDNS. You have to select one
of the two WAN ports first and configure one WAN port at a time.
Parameters Description
3.2.1 Dynamic IP Your ISP will automatically give you an IP address
3.2.2 Static IP address Your ISP has given you an IP address already
3.2.3 PPPoE Your ISP requires PPPoE connection.
3.2.4 PPTP Your ISP requires you to use a Point-to-Point Tunneling
Protocol (PPTP) connection.
3.2.5 L2TP Your ISP requires L2TP connection.
3.2.6 Telstra Big Pond Your ISP requires Telstra Big Pond connection.
3.2.7 Policy You can configure WAN policy. (XRT-402D/104D)
3.2.8 QoS You can specify rules for bandwidth control. (XRT-
402D/104D)
3.2.9 DNS You can specify a DNS server that you wish to use