Quick Guide

9
7.Setting1000BASE-XforSFP+Port
The L3 Managed Switch supports both 10GBASE-X SFP+ transceiver and
1000BASE-X SFP transceiver by manual setting and the default SFP+ port
speed is set to 10Gbps. To establish the ber connection with 1000BASE-X SFP
transceiver,thefollowingcommandcongurationisrequired:
XGS3-24242#cong
XGS3-24242(cong)#interface ethernet 1/0/25-28
XGS3-24242(cong-if-port-range)#speed-duplex force1g-full
Figure 7-1: Setting 1000BASE-X Screen