Quick Guide

10
8.Setting100BASE-FXforSFPPort
The L3 Managed Switch supports both 1000BASE-X and 100BASE-FX SFP
transceiversby manualsetting and the default SFP port speedis set to 1000Mbps.
To establish the ber connection with 100BASE-FX SFP transceiver, the following
commandcongurationisrequired:
XGS3-24242#cong
XGS3-24242(cong)#interface ethernet 1/0/9-24
XGS3-24242(cong-if-port-range)#speed-duplex force100-fx
Figure 8-1: Setting 100BASE-FX Screen