Datasheet
XGS3-24242
1
Layer 3 24-Port 100/1000X SFP + 8-Port Shared TP + 4-Port 10G
SFP+ Stackable Managed Switch (100~240V AC, 36-75V DC)
Powerful Layer 3 Routing Solution for All Long-Reach Networks
PLANET XGS3-24242 is a Layer 3 Stackable Managed Gigabit Switch that provides
high-density performance, Layer 3 static routing, RIP (Routing Information
Protocol) and OSPF (Open Shortest Path First) with 10Gbps uplink and
multiple SFP ber interfaces delivered in a rugged, strong case. The administrator
can exibly choose the suitable SFP/SFP+ transceiver according to the transmission
distance or the transmission speed required to extend the 10G network efficiently.
Besides, with 128Gbps switching fabric, the XGS3-24242 can handle extremely
large amounts of data in a secure topology linking to backbone or high capacity
servers for ISP and enterprise VoIP, video streaming, and multicast applications.
Physical Ports
• 24 100/1000BASE-X mini-GBIC/SFP ports
• Eight 10/100/1000BASE-T RJ45 copper ports, shared with
Port-1 to Port-8
• 4 10GBASE-SR/LR SFP+ ports, compatible with 1000BASE-
SX/LX/BX SFP
• RJ45 to DB9 console interface for switch basic management
and setup
• 1 USB2.0 interface for conguration and rmware storage
Stacking Features
• IP Stacking
– Connects with stack member via Gigabit TP, SFP and 10G
SFP+ interfaces
– Single IP address management, supporting up to 24 IP
units stacked together
• Hardware Stacking
– Virtualized multiple XGS3-24242 into one logical device
– Connects with stack member via assigned 10G SFP+
interfaces
– Single IP address stack management, supporting up to 4
hardware units stacked together
– Stacking architecture supports redundant ring mode
IP Routing Features
• IP routing protocol supports RIPv1/v2, RIPng, OSPFv2/v3,
BGP4/4+
• Routing interface provides per VLAN routing mode
• VRRPv1/v3 protocol for redundant routing deployment
• Supports route redistribution
• Supports hardware-based wire-speed VLAN routing
Multicast Routing Features
• Supports PIM-DM (Protocol Independent Multicast – Dense
Mode) and PIM-SM (Protocol Independent Multicast – Sparse
Mode) and PIM-SSM (Protocol Independent Multicast –
Source Specic Multicast)
• Supports DVMRP (Distance Vector Multicast Routing
Protocol)
• Supports IGMP v1/v2/v3 and MLD v1/v2
Layer 2 Features
• Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,
36~75V DC Power Input
100-240V AC
Power Input
16 x 100/1000X SFP Slots
Grounding
4 x 1/10G SFP+ Slots8 x Gigabit TP Ports & 8 x SFP Combo Ports
Ethernet Mgmt Port
RJ45 Type
Console
High Performance 10Gbps Ethernet Capacity
The four SFP+ slots built in the XGS3-24242 supports Dual-speed, 10GBASE-SR/
LR or 1000BASE-SX/LX. With 10Gbps uplink interfaces, the XGS3-24242 boasts a
high-performance switch architecture that is capable of providing non-blocking switch
fabric and wire-speed throughput as high as 128Gbps, which greatly simplifies the
tasks of upgrading the LAN for catering to increasing bandwidth demands.
AC and DC Redundant Power to Ensure Continuous Operation
The XGS3-24242 is equipped with one 100~240V AC power supply unit and one
additional 36-75V DC power supply unit for redundant power supply. A redundant
power system is also provided to enhance the reliability with either AC or DC power
supply unit. The redundant power system is specifically designed to handle the
demands of high-tech facilities requiring the highest power integrity.