Quick Guide

11
9.UsingCopperInterfaceonComboPort
The Managed Switch’s combo port has SFP and copper interface and the default
combo port type is SFP port only. To establish the combo port connection with
copperinterface,thefollowingcommandcongurationisrequired:
XGS3-24042#cong
XGS3-24042(cong)#interface ethernet 1/0/21-24
XGS3-24042(cong-if-port-range)#media-type copper
Figure 9-1 Using Copper Interface Screen
10.SavingtheConguration
In Managed Switch, the running conguration le stores in the RAM. In the
current version, the running conguration sequence running-cong can be saved
from the RAM to FLASH by write command or copy running-cong startup-
congcommand,sothattherunningcongurationsequencebecomesthestart-up
congurationle,whichiscalledcongurationsave.
XGS3-24042#copy running-cong startup-cong
Figure 10-1 Copying Running-cong Startup-cong Screen