Datasheet
XGS3-24242
IPv6 Routing and 10G Ethernet Switch Solutions for the Next
Generation Internet Protocol
IPv6 (Internet Protocol version 6) is well known as the next generation
Internet Protocol to solve the lack of available IPv4 addresses. IPv6 can
provide larger address space than IPv4 for the rapid growing networks. To
provide smooth migration path from IPv4 to IPv6 for the future network
upgrades, PLANET releases the multi-layer IPv6 / IPv4 Gigabit Ethernet
Routing Switch, XGS3-24242, to satisfy the bandwidth requirements
and protect network investment for enterprises. The XGS3-24242 is
implemented with the following advanced technologies:
■
IPv6 / IPv4 Routing and Management
■
10G Ethernet Switching
■
Single IP Address Management
■
Redundant Power System
Multi port Fiber Optical connective capability extend the coverage
of Multi-Layer Routing Services
The XGS3-24242 Multi-Layer Switch is an essential Layer 3 functionality
multimedia Switch which brings high-end security and traffic control to
the edge of the network. The XGS3-24242 offers multi port fiber optical
connective capability and helps to extend the coverage of Multi-Layer
routing Services. With IP routing and multicast routing capabilities and
flexible SFP interfaces, the XGS3-24242 is the ideal choice for the core
layer of Telecoms, campuses, and enterprises that need long reach and
stability of IP metro access networks.
Supports 10Gb Ethernet
10Gb Ethernet which adopts full-duplex technology instead of low-speed,
half-duplex CSMA/CD protocol, is a big leap in the evolution of Ethernet.
10Gb Ethernet can be deployed in star or ring topologies. With 10Gb
Ethernet technology applied, the XGS3-24242 provides broad bandwidth
and powerful processing capacity. It is suitable for metropolitan networks
and wide area networks. Using the XGS3-24242, users can simplify
network structures and reduce cost of network construction.
Networking Protocols
The XGS3-24242 supports various networking protocols to meet the
requirements of complex network constructions. It is compatible with
802.1d/w/s, 802.1Q, 802.1p, 802.3ad, 802.3x, GVRP, DHCP, SNTP and
etc. The Switch also supports multicast protocols including IGMP, DVMRP
and PIM. Moreover, the XGS3-24242 complies RIPv1/2, OSPF and IPv6.
Reliable Power Supply
The XGS3-24242 provides AC/DC power redundancy. It can be deployed
with 100~240V AC power input, -48V DC power input or 100~240V AC
power/-48V DC power input simultaneously.
ACL
The XGS3-24242 supports ACL policies comprehensively. The traffic can
be classified by source/destination IP addresses, source/destination MAC
addresses, IP protocols, TCP/UDP, IP precedence, time ranges and ToS.
Moreover, various policies can be conducted to forward the traffic. The
XGS3-24242 also provides IEEE 802.1x port based access authentication,
which can be deployed with RADIUS, to ensure the port level security and
block illegal users.
QoS
The XGS3-24242 switch fully supports DiffServ Module. Users can specify
a queue bandwidth on each port. WRR/SP/SWRR scheduling is also
provided. The XGS3-24242 supports the port security to enable users
to deploy trusted CoS, DSCP, IP precedence and port priority. Users can
modify packets’ DSCP and COS values so the traffic can be classified by
port, VLAN, DSCP, IP precedence and ACL table. User can also modify
packets’ DSCP and IP precedence values to specify different bandwidths
for voice / data / video to customize different qualities of service.
Perfect Web Management
The XGS3-24242 supports SNMP, In-band and Out-of-band Management,
CLI and WEB interface, and RMON. It can mail the correlative sensitive
information to the administrator abide by SMTP protocol. The XGS3-
24242 supports SSH protocol to ensure the configuration management
security of the switch.
Data Sheet
1
24-Port 100/1000X SFP with 4 Optional 10G slots
Layer 3 Managed Stackable Switch
Two optional 2-Port 10Gbps SFP+
uplink module for XGS3-24242
XGS3-2SFP+
24 x 100/1000Base-X SFP Slot
12 x 10/100/1000Base-T RJ-45 Combo
1 x RJ-45 Serial Console Port