User's Manual

570
Neighbor ID Pri State Dead Time Interface Instance ID
200.200.200.2 1 Full/DR 00:00:35 VLAN0 0
200.200.200.2 1 Full/ - 00:00:36 VLINK1 0
R2#show ipv6 ospf neighbor
OSPFv3 Process (1)
OSPFv3 Process (1)
Neighbor ID Pri State Dead Time Interface Instance ID
200.200.200.1 1 Full/Backup 00:00:36 VLAN0 0
200.200.200.1 1 Full/ - 00:00:37 VLINK1 0
Browsing the information in the routing table:
R1#show ipv6 route
C 6::/64[1]
is directly connected, C,VLAN1
C 6::1/128[1]
is directly connected, L, VLAN1
C 101::/64[2]
is directly connected, C, VLAN0
C 101::1/128[2]
is directly connected, L, VLAN0
O 101::2/128[2]
[110,10] via fe80:4::2e0:fff:fe26:a8(on VLAN0)
O 888::/64[2]
[110,20] via fe80:4::2e0:fff:fe26:a8(on VLAN0)
S 2001::/64[1]
[1,0] via 6::2(on VLAN1)
C fe80::/10[2]
is directly connected, L,Null0
C fe80::/64[2]
is directly connected, C, VLAN0
C fe80::2e0:fff:fe26:2d98/128[2]
is directly connected, L, VLAN0
C fe80::/64[1]
is directly connected, C, VLAN1
C fe80::2e0:fff:fe26:2d99/128[1]
is directly connected, L, VLAN1
C ff00::/8[2]
is directly connected, L,Null0
R2#show ipv6 route
O 6::/64[1]
[110,20] via fe80:4::2e0:fff:fe26:2d98(on VLAN0)
C 101::/64[1]
is directly connected, C, VLAN0
O 101::1/128[1]
[110,10] via fe80:4::2e0:fff:fe26:2d98(on VLAN0)
C 101::2/128[1]
is directly connected, L, VLAN0
C 888::/64[1]
is directly connected, C, VLAN1
C 888::8/128[1]
is directly connected, L, VLAN1
O 2001::/64[1]
[110,150] via fe80:4::2e0:fff:fe26:2d98(on VLAN0)
C fe80::/10[1]
is directly connected, L,Null0
C fe80::/64[1]
is directly connected, C, VLAN0