User's Manual

563
show ipv6 ospf
[process-id]
database
show ipv6 ospf
[process-id]
database
[router] [adv-router
router-id
]
show ipv6 ospf
[process-id]
database
[network] [adv-router
router-id
]
show ipv6 ospf
[process-id]
database
[inter-prefix] [adv-router
router-id
]
show ipv6 ospf
[process-id]
database
[inter-router] [adv-router
router-id
]
show ipv6 ospf
[process-id]
database
[external] [adv-router
router-id
]
show ipv6 ospf
[process-id]
database [link]
[adv-router
router-id
]
show ipv6 ospf
[process-id]
database
[intra-prefix] [adv-router
router-id
]
Displays the information about the OSPFv3
database.
show ipv6 ospf interface
Displays the information about the OSPFv3
interface.
show ipv6 ospf neighbor
Displays the information about OSPFv3
neighbors.
show ipv6 ospf route
Displays the routing information about
OSPFv3.
show ipv6 ospf topology
Displays the OSPFv3 topology.
show ipv6 ospf virtual-links
Displays the virtual links of OSPFv3.
debug ipv6 ospf
Monitors all OSPFv3 behaviors.
debug ipv6 ospf events
Monitors the OSPFv3 events.
debug ipv6 ospf ifsm
Monitors the state machine of the OSPFv3
interface.
debug ipv6 ospf lsa
Monitors related behaviors about OSPFv3
LSA.
debug ipv6 ospf nfsm
Monitors the state machine of the OSPFv3
neighbors.
debug ipv6 ospf nsm
Monitors the information of which the
management module notifies OSPFv3.
debug ipv6 ospf packet
Monitors the OSPFv3 packets.
debug ipv6 ospf route
Monitors the routing information about
OSPFv3.
80.4 OSPFv3 Configuration Example
80.4.1 Example for OSPFv3 Route Learning Settings
OSPFv3 requires switching information among many internal routers, ABR and ASBR. In the minimum settings,
the OSPFv3-based router works under the case that all its parameters take their default values and there is
no authentication.
The following are three configuration examples:
The first example shows the commands for basic OSPFv3 settings.
The second example shows multiple OSPFv3 processes can be set on a router.
The third example shows how to use OSPFv3 to learn routes.