User's Manual
547
78.3.3 Monitoring and Maintaining the State of the Routing Table
To display all kinds of statistics information about routes, run the following commands in EXEC mode:
Comman Purpos
show ipv6 route
Displays the information in the main
ti
t
bl
show ipv6 route [protocol]
Displays the routing information of the
corresponding routing protocol in the
show ipv6 route summary
Displays the statistics information
about the main routing table.
show ipv6 fib route
Displays the items in the main
forwarding table, FIB.
show ipv6 fib summary
Displays the statistics information
about the forwarding table.
Show ipv6 route summary (line
card)
Displays the statistics information
about the routing table on the wire
Show ipv6 route information (line
card)
Displays the information about the
current state on the wire card.
Show ipv6 route [ delete | stale | un-
lpm | no-lla | ipv6-address ] (line
card
)
Displays all kinds of routing
information on the wire card.
To trace all related events and information on the route management module, run the following commands
in EXEC mode.
Command Purpose
debug ipv6 routing message
Traces the reception and transmission of the
I
P
6
i
ft
i
debug ipv6 routing search
Traces routing search.
debug ipv6 routing timer
Traces the IPv6 clock.
Debug ipv6 routing redis
Traces the IPv6-redistribute information.
debug ipv6 fib cache
Traces the IPv6-cache information.
Debug ipv6 fib message
Traces the information in the IPv6 forwarding
t
bl
Debug ipv6 routing exf
(line card)
Traces the EXF information that is added to
th
li
d