User's Manual

505

Configuring SWITCH Switch A

 Fault 1: Configure the address for the interface of the private network.

Switch_config_v1#

ip address

192.168.20.18 255.255.255.0

 Fault 2: Configure the address for the interface of the public network.

Switch_config_v2#

ip address

211.162.1.120 255.255.255.0

 Fault 3: Configure virtual switch group 1 on the interface of the private network.

The virtual address is 192.168.20.1. The priority value is 120.

Switch_config_v1#

vrrp

associate

192.168.20.1 255.255.255.0

Switch_config_v1#

vrrp

priority

120

 Fault 4: Display information about the virtual SWITCH.

Switch_config#

show vrrp detail

VLAN1 - Group 1

VRRP State is Master

Virtual IP address : 192.168.20.1/24

Virtual Mac address : 0000.5e00.0101

Current Priority : 120 (Config 120)

VRRP timer : Advertise 1.0 s (default) master_down 3.6 s

VRRP current timer : Advertise 1.0 s master_down 0.0 s preempt after 0.0 s

Authentication string is not set

Preempt is set (delay : 0 s)

Learn Advertise Interval is not set

Master Router IP : 192.168.20.18, priority : 100, advertisment : 1.0 s