User's Manual

503
70.3.6 Configuring VRRP Priority
Run the following commands in vlan interface configuration mode.
Command Purpose
vrrp
vrid
priority
value
(1~254)
Configures VRRP priority
no vrrp
vrid
priority
Resumes the default VRRP priority mode.
When the virtual address and the port address are same, VRRP will automatically increase its priority value to
255. After the virtual address or the port address changes, the priority value automatically resumes to the
original value.
The default value is 100.
70.3.7 Configuring VRRP Clock Value
Run the following commands in vlan interface configuration mode.
Command Purpose
vrrp
vrid
timer advertise {
value
| dsec
value
| csec
value
}
Configures VRRP clock value
no vrrp
vrid
timer advertise
Resumes the VRRP clock value to the
default value.
no vrrp
vrid
timer learn
Configures VRRP clock as the learning
mode
The clock value means the shortest time for the virtual routing SWITCH to recover from a trouble. When the
master routing SWITCH is down, the backup routing SWITCH will serve as the master routing SWITCH after
the 3*advertisement + skew_time interval. It is clear that the trouble cannot be removed immediately if the
advertisement clock value is too big. Hence, the default value of the advertisement clock is recommended.
The default value is 1 second.
70.3.8 Configuring VRRP Monitoring Object
Run the following commands in vlan interface configuration mode.
Command Purpose
vrrp vrid track interface intf-id value
Configures VRRP monitoring local
interface state
no vrrp vrid track interface intf-id
Resumes to the default setting
vrrp vrid track ip ip-address value
Configures VRRP monitoring to the
static routing state to the designated
address
no vrrp vrid track ip ip-address
Resumes to the default setting.
With the monitoring function, VRRP group can adjust the priority appropriately according to the change of the