User's Manual

409
Command Purpose
PE_config#ip vrf ce
Enters VRF configuration mode.
PE_config_vrf_ce#rd ASN:nn or IP-
address:nn
Configures VRF routing tag, and creates VRF
table.
PE_config_vrf_ce# description LINE
Configures description of VRF.
56.3.5 Configuring Static Route of VRF
To configure the static route of VRF, do as follows:
Command Purpose
PE_config#ip vrf ce
Enters VRF configuration mode.
PE_config_vrf_ce#rd ASN:nn or IP-
address:nn
Configures VRF routing tag and creates VRF
table.
PE_config_vrf_ce#exit
Exits from VRF configuration mode.
PE_config#ip route [vrf vrf-name] dest
mask { type num | nexthop } [distance]
Configures VRF static route.
56.3.6 Monitoring VRF
To monitor VRF, show the statistics of VRF. To monitor, do as follows:
Command Purpose
PE#show ip vrf
Shows VRF and its associated port information.
PE#show ip vrf [{brief | detail |
interfaces}] vrf-name
Shows VRF configuration and its associated port
information.
PE#show ip route vrf vrf-name[A.B.C.D | all | beigrp |
bgp | ospf | rip | connect | static | summary ]
Shows the routing information in VRF routing table.
56.3.7 Maintaining VRF
Maintain VRF, track the main routing table and change of VRF routing table and VRF configuration information
in the management mode and do as follows:
Command Purpose
PE#debug ip routing
Track the addition, deletion and change of the
route in the main routing table