User's Manual

391
Command Purpose
show ip dhcpd database-
agent
Displays the current address distribution information of DHCP
server.
To check the current address pool information of DHCP Server, run the following command in EXEC mode.
Command Purpose
show ip dhcpd pool
Displays the current address pool information of DHCP server.
(20) Clearing Information about DHCP Server
To delete the current address distribution information of DHCP server, run the following command in EXEC
mode:
Command Purpose
clear ip dhcpd binding {[ip-
addr]&<0-10>|*}
Deletes the specified address distribution information.
To delete the current packet statistics of DHCP server, run the following command in EXEC mode:
Command Purpose
clear ip dhcpd statistic
Deletes the current packet statistics of DHCP server.
To delete the current address which has abandoned or disabled by DHCP Server address pool, run the
following command in EXEC mode.
Command Purpose
clear ip dhcpd abandoned
Deletes the current address which has abandoned or
disabled by DHCP Server address pool.
52.3.3 DHCP Server Configuration Example
In the following example, the timeout time of the ICMP detection packet is set to 200ms; Address pool 1 is
configured and the DHCP server is enabled.
ip dhcpd ping timeout 2
ip dhcpd pool 1