User's Manual

387
auto-bind means to allow BOOTP client
distributing auto binding address.
(9) Configuring DHCP Database Server Address
Run the following command in the global configuration mode:
Command Purpose
ip dhcpd database-agent ip-address
Configures DHCP database server address,
run the following command.
If this address is not set, the address
distribution information will be saved to the
flash.
Note: Before the address distribution
information is saved, PC should enable the
TFTP server and also PC and the DHCP server
should connect correctly.
(10) Configuring DHCP Database File Name
Run the following command in the global configuration mode:
Command Purpose
ip dhcpd database-file word [time-stamp]
Configures the DHCP database file name, run
the following command.
Word means database file name
Time-stamp means file name addition time
stamp
(11) Saving the Change of Cache Entry in Time to the Data Base File
Run the following command in the global configuration mode:
Command Purpose
ip dhcpd database-realtime
Saves the change of cache entry in time to the
data base file, run the following command.