User's Manual

38
LNK/ACT, Green
Switching Specifications
Switch Architecture
Store-and-forward
Switch Capacity
800Gbps/non-blocking 1.92Tbps/non-blocking
Switch Throughput
960Mpps 1440Mpps@64bytes
Address Table
32K MAC address table with auto
learning function
64K MAC address table with
auto learning function
Shared Data Buffer
4MB 9MB
Flow Control
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Jumbo Frame
9KB
IPv4 Layer 3 Functions
IP Routing Protocol
RIP v1/v2
OSPFv2
BGP (Border Gateway Protocol)
Static routing
Multicast Routing Protocol
PIM-DM and PIM-SM
PIM-SSM
Routing Features
VRRP
Policy routing
Load balance through equal-cost routing
BFD (Bidirectional Forwarding Detection) for OSPF and BGP
IPv6 Layer 3 Functions
IP Routing Protocol
RIPng
OSPFv3
BGP4+
Routing Features
Manual tunnel
ISATAP tunnel
6-to-4 tunnel
IPv6 Functions
ICMPv6, DHCPv6, ACLv6, IPv6 Telnet
IPv6 Neighbor Discovery
Path MTU Discovery
Layer 2 Functions
Port Configuration
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Bandwidth control on each port
Port loopback detect