User's Manual

334
{snmp-ifindex/manual/hn-type /
cm-type/ [host]}
no ip dhcp-relay snooping
information option format
{snmp-ifindex/manual/hn-type
/cm-type/[[host]}
Sets that option82 is not carried when DHCP-snooping
forwards the DHCP packets.
If a manual mode is set to enter in option82, conduct the following configurations in interface mode to set the
circuit-id:
Command Operation
dhcp snooping information
circuit-id string [STRING]
If option82 is set to be in the manual format, you need to
set DHCP-snooping to forward DHCP packets with
bearing of option82, whose content is the character string
written by STRING. This command is set on the port that
connects the client.
dhcp snooping information
circuit-id hex [xx-xx-xx-xx-xx-
xx]
If option82 is set to be in the manual format, you need to
set DHCP-snooping to forward DHCP packets with
bearing of option82, whose content is the Hex system..
This command is set on the port that connects the client.
no dhcp snooping information
circuit-id
Deletes the manually configured option82 circuit-id.
If a manual mode is set to enter in option82, conduct the following configurations in interface mode to set the
remote-id:
Command Operation
dhcp snooping information
remote-id string [STRING]
If option82 is set to be in the manual format, you need to
set DHCP-snooping to forward DHCP packets with
bearing of option82, whose content is the character string
written by STRING. This command is set on the port that
connects the client.
dhcp snooping information
remote-id hex [xx-xx-xx-xx-xx-
xx]
If option82 is set to be in the manual format, you need to
set DHCP-snooping to forward DHCP packets with
bearing of option82, whose content is the Hex system..
This command is set on the port that connects the client.
no dhcp snooping information
remote-id
Deletes the manually configured option82 remote-id.
If a manual mode is set to enter in option82, conduct the following configurations in interface mode to set the
vendor-specific: