User's Manual

305

Location Configuration
Configuring switch S1:
Switch_config#lldp run
Switch_config#
Configuring switch S2:
Switch_config#lldp run
Switch_config#location elin identifier 1 1234567890 //Configuring elin information
Switch_config#location civic identifier 1 //Entering location configuration mode
Switch_config_civic#language English
Switch_config_civic#city Shanghai
Switch_config_civic#street Curie
Switch_config_civic#script EN //The above configured is civic information
Switch_config_civic#quit
Switch_config#int g0/8
Switch_config_g0/8#location elin 1 //Set elin id for the interface
Switch_config_g0/8#location elin 1 //Set civic id for the interface
Switch_config_g0/8#show location elin //Display elin configuration information
elin information:
elin 1: 1234567890
total: 1
Switch_config_g0/8#show location elin //Display civic configuration information
civic address information:
identifier: 1
City: Shanghai
Language: English
Script: EN
Street: Curie
-------------------------------------
total: 1
Switch_config_g0/8#
The information of Neighbor B will be displayed on Switch A about 1 minute later.
S1:
Switch_config#show lldp neighbors
Capability Codes:
(R)Router,(B)Bridge,(C)DOCSIS Cable Device,(T)Telephone
(W)WLAN Access Point, (P)Repeater,(S)Station,(O)Other