User's Manual

301

Basic Settings
Configuring switch S1:
Switch_config#lldp run
Switch_config#
Configuring switch S2:
Switch_config#lldp run
Switch_config#
The information of Neighbor B will be displayed on Switch A about 1 minute later. MED-TLV information is
not sent by default.
S1:
Switch_config#show lldp neighbors
Capability Codes:
(R)Router,(B)Bridge,(C)DOCSIS Cable Device,(T)Telephone
(W)WLAN Access Point, (P)Repeater,(S)Station,(O)Other
Device-ID Local-Intf Hldtme Port-ID Capability
Switch Gig0/8 99 Gig0/1 B
Total entries displayed: 1
Switch_config#show lldp neighbors detail
chassis id: 00e0.0fac.32ff
port id: Gig0/1
port description: GigaEthernet0/1
system name: Switch
system description: SWITCH Software, Version 4.1.0B
Serial: S24090103
Compiled: 2011-9-21 9:24:8 by WRL
Time remaining: 96
system capabilities: R B
enabled capabilities: B
Management Address:
IP: 90.0.0.21
Port VLAN ID: 1
PPVID: 1