User's Manual

297
Step 3 lldp management-ip A.B.C.D Sets the management IP address of a port.
Note: Both the no lldp command and the management-ip command can be used to resume the default
management address of the port and the default management address is the IP address of the VLAN interface
that corresponds to the PVID port. When the corresponding VLAN interface does not exist, the management
address is 0.0.0.0.
40.4.9 Sending Trap Notification to mib Database
Sending Trap Notification to lldp mib database or ptopo mib database.
Run the following commands in the global configuration mode to send trap notification to lldp mib database or
ptopo mib database.
Procedure Command Purpose
Step 1 config Enters the global configuration mode.
Step 2 lldp trap-send lldp-mib Sends trap notification to lldp mib database.
Step 3 lldp trap-send ptopo-mib Sends trap notification to ptopo mib database.
Note: Both the no lldp command and the management-ip command can be used to resume the default
management address of the port and the default management address is the IP address of the VLAN interface
that corresponds to the PVID port. When the corresponding VLAN interface does not exist, the management
address is 0.0.0.0.
40.4.10 Configuring the Location Information
The location configuration is used to determine the address of the local machine.
Run the following commands in global configuration mode to configure the location information:
Procedure Command Purpose
Step 1 config Enters the global configuration mode.
Step 2 location elin identifier id WORD
Sets the location elin information, in which id
is the elin identifier number and WORD
stands for the elin information, which ranges
from 10 to 25 bytes.
Step 3 location civic identifier id Enters the location configuration mode.
Step 4 language WORD Sets the language.
Step 5 state WORD
Sets the state’s (provincial) name, such as
shanghai.
Step 6 county WORD Sets the name of a county.
Step 7 city WORD Sets the name of a city.
Step 8 division WORD Sets the name of a division.
Step 9 neighborhood WORD Sets the name of neighborhood.
Step 10 street WORD Sets the name of a street.
Step 11 leading-street-dir WORD
Sets the direction of a main street, such as N
(north).
Step 12 trailing-street-suffix WORD Sets the suffix of a small street, such as SW.
Step 13 street-suffix WORD Sets the suffix of a street, such as platz.