User's Manual

242
no spanning-tree vlan
vlan-list
hello-time
Resumes the hello-time of a designated VLAN
to the default value.
Run the following commands to set the port’s features in switch port configuration mode:
Command Purpose
spanning-tree vlan
vlan-list
cost
Sets the path cost of a port in a designated
VLAN.
no spanning-tree vlan
vlan-list
cost
Resumes the path cost of a port in VLAN to the
default value.
spanning-tree vlan
vlan-list
port-priority
Sets the port priority in VLAN.
no spanning-tree vlan
vlan-list
port-priority
Resumes the priority of a port in VLAN to the
default value.
In monitor or configuration mode, run the following commands to browse the state of the spanning tree in a
designated VLAN:
Command Purpose
show spanning-tree vlan
vlan-list
Browses the state of the spanning tree in a
VLAN.
show spanning-tree pvst instance-list
To check the corresponding relation between
PVST instances and VLAN, run this command.