User's Manual

228
[no] gvrp
Enables/disables interface GVRP.
In order for the port to become an active GVRP participant, you must enable GVRP globally first and the port
must be an 802.1Q trunk port,
It is enabled by default.
32.3.4 Monitoring and Maintenance of GVRP
Perform the following operations in EXEC mode:
Command Description
show gvrp statistics
[
interface
port_list] Displays GVRP statistics.
show gvrp status
Displays GVRP global state information.
[
no
]
debug gvrp
[
packet
|
event
] Enables/disables GVRP data packet and event
debug switches. All debug switches will be
enabled/disabled if not specified the concrete
switch.
Display GVRP statistics:
switch#show gvrp statistics interface Tthernet0/1
GVRP statistics on port Ethernet0/1
GVRP Status: Enabled
GVRP Failed Registrations: 0
GVRP Last Pdu Origin: 0000.0000.0000
GVRP Registration Type: Normal
Display GVRP global state information:
Switch#show gvrp status
GVRP is enabled