Manualshelf

User's Manual

ManualsBrandsPLANET Technology ManualsLAN SwitchesLayer 3 48-Port 10G SFP+ + 2-Port 40G QSFP+ + 4-Port 100G QSFP28 Managed Switch
191192193194195196197198199200
193
Ip means only the ip packets that comply with the
binding requirements can pass.
Arp means only the arp packets that comply with the
binding requirements can pass.
both-arp-ip means that ip and arp packets that comply
with the binding requirements can pass.
exit Backs to the global configuration mode.
exit Backs to the EXEC mode.
25.9 VLAN MAC Address Learning
To enable or disable Vlan MAC learning on a port, run the following commands.
Command Purpose
config Enters the global configuration mode.
[no] vlan disable-learning <
add | remove word | word>
Disable/enable vlan mac address learning
Enable/disable vlan mac address learning.
exit Backs to the EXEC configuration mode.
25.10 VLAN MAC Address Learning Number
To configure VLAN MAC Address Learning Number, run the following command:
Command Purpose
config
Enters the global
configuration mode
[no] vlan dynamic vlan word maximum num
Cancels/configures the
learnable max number of vlan
mac address
Word needs to configure vlan
of learning address
num learnable max mac
address num