User's Manual

176
To modify the permission or the login password, click “Edit” on the right of the user list.
Note:
1. Please make sure that at least one system administrator exists in the system, so that you can
manage the devices through Web.
2. The limited user can only browse the status of the device.
20.1.2 Establishing a New User
If you click “New” on the User Management page, the Creating User page appears.
Figure 3 Creating new users
In the “User name” text box, enter a name, which contains letters, numbers and symbols except “?”, “\”, “&”,
“#” and the "Space" symbol. \ " & #和空格以外的字符。
In the “Password” textbox enter a login password, and in the “Confirming password” textbox enter this login
password again.
In the “User permission” dropdown box set the user's permission. The “System administrator” user can browse
the status of the device and conduct relevant settings, while the limited user can only browse the status of the
device.
20.2 Log Management
If you click System Manage -> Log Manage, the Log Management page appears.
Figure 4 Log management
If “Enabling the log server” is selected, the device will transmit the log information to the designated server. In
this case, you need enter the address of the server in the “Address of the system log server” textbox and select
the log's grade in the “Grade of the system log information” dropdown box.
If “Enabling the log buffer” is selected, the device will record the log information to the memory. By logging on
to the device through the Console port or Telnet, you can run the command “show log” to browse the logs