User's Manual
170
Figure 6 Configuring the RMON statistic information
You need to set a physical port to be the reception terminal of the monitor data.
The index is used to identify a specific interface; if the index is same to that of the previous application interface,
it will replace that of the previous application interface.
At present, the monitor statistic information can be obtained through the command line “show rmon statistics”,
but the Web does not support this function.
18.2.2 RMON History Information Configuration
If you click Network Management Config -> RMON -> RMON history -> New, the RMON history page
appears.
Figure 7 Configuring the RMON history information
You need to set a physical port to be the reception terminal of the monitor data.
The index is used to identify a specific interface; if the index is same to that of the previous application interface,
it will replace that of the previous application interface.
The sampling number means the items that need be reserved, whose default value is 50.
The sampling interval means the time between two data collection, whose default value is 1800s.
At present, the monitor statistic information can be obtained through the command line “show rmon history”,
but the Web does not support this function.
18.2.3 RMON Alarm Information Configuration
If you click Network Management Config -> RMON -> RMON Alarm -> New, the RMON Alarm page appears.