User's Manual

161
Figure 5: Setting the static route
16.3 IGMP Agent
16.3.1 Enabling the IGMP Agent
If you click Layer-3 Config -> IGMP agent, the IGMP agent page appears.
Figure 6: Enabling the IGMP agent
On this page you can enable or disable the IGMP agent. It is noted that the IGMP agent can be enabled or
disabled on a switch only after the IP IGMP-snooping function is enabled on the switch.
16.3.2 Setting the IGMP Agent
If you click Layer-3 Config -> IGMP agent -> IGMP agent Config, the IGMP agent configuration page
appears. Click New to create a new IGMP agent.
Figure 7: Setting the IGMP agent