User's Manual

155
15.17.4 Multicast List
Click the Multicast List Info option on the top of the page and the Multicast List Info page appears.
Figure 16 Multicast List
On this page the multicat groups, which are existent in the current network and are in the statistics of IGMP
snooping, as well as port sets which members in each group belong to are dislayed.
Click “Refresh” to refresh the contents in the list.
Note:
By default, a multicast list can display up to 15 VLAN items. You can modify the number of
multicast items by running
ip http web igmp-groups
after you log on to the device through the
Console port or Telnet.
15.18 Setting Static ARP
If you click Layer-2 Config -> Static ARP Config, the static ARP configuration page appears.
Figure 17 Displaying static ARP
You can click New to add an ARP entry. If the Alias column is selected, it means to answer the ARP
request of the designated IP address.
If you click Edit, you can modify the current ARP entry.
If you click Cancel, you can cancel the chosen ARP entry.
Figure 18 Setting static ARP