User's Manual

151
takes the MAC address as the unique index.
Click New to create DHCP Snooping manual Binding Port Item.
15.14 MTU Configuration
If you click Layer-2 Config -> MTU Config on the navigation bar, the MTU Config page appears.
You can set the size of the maximum transmission unit (MTU).
15.15 PDP Configuration
15.15.1 Configuring the Global Attributes of PDP
If you click Layer-2 Config -> PDP Config in the navigation bar, the Global PDP Config page appears, as shown
in figure 4.
You can choose to enable PDP or disable it. When you choose to disable PDP, you cannot configure PDP.
The “HoldTime” parameter means the time to be saved before the router discards the received information if
other PDP packets are not received.
15.15.2 Configuring the Attributes of the PDP Port
If you click Layer-2 Config -> PDP Config-> PDP port Config in the navigation bar, the Setting the attributes of
the PDP port page appears, as shown in figure 5.