User's Manual

147
The list shows the current configured MEAPS ring, including Domain ID, Ring ID, Ring type, Node type, Control
Vlan, Hello Time, Failed Time, Pre Forward Time, primary port and secondary port.
Click New to create a MEAPS ring.
Click Edit on the right and configure the time parameter and the primary and secondary port of the ring.
Note:
1. The system supports 4 MEAPS (0-3).
2. One domain supports 8 rings (0-7).
3. Once one MEAPS is configured, its Domain ID, ring ID, ring type, node type and control Vlan
cannot be modified. If adjustment is needed, please delete the Ethernet ring and reset it.
15.11.2 MEAPS Ring Configuration
If you click New on the Multiple Ring Protection page or click Edit on the right, the New MEAPS Global Config
page appears.
Note:
In an existed MEAPS ring, its domain ID, ring ID, ring type, node type and control Vlan cannot
be modified.
The primary ring can only be configured with the main node and the Transit node.
The secondary ring can be configured with the main node, the transit node, the edge node and the assistant
edge node.
The primary node and the transit node can only be existed in one ring. The edge node and the assistant edge
node can be existed in multiple rings simultaneously.
On the right drop box of “Primary-Port” and “Secondary-Port”, select one port respectively as the ring port or
select None
15.12 Backup Link Protocol Configuration
15.12.1 Backup Link Protocol Global Configuration
If you click Layer-2 Config ->Backup Link Config ->Backup Link Protocol Global Config on the navigation bar,
the Backup Link Protocol Global Config page appears.