Manualshelf

User's Manual

ManualsBrandsPLANET Technology ManualsLAN SwitchesLayer 3 48-Port 10G SFP+ + 2-Port 40G QSFP+ + 4-Port 100G QSFP28 Managed Switch
141142143144145146147148149150
142
15.5 Setting Static ARP
If you click Layer-2 Config -> Static ARP Config, the static ARP configuration page appears.
Figure 17 Displaying static ARP
You can click New to add an ARP entry. If the Alias column is selected, it means to answer the ARP
request of the designated IP address.
If you click Edit, you can modify the current ARP entry.
If you click Cancel, you can cancel the chosen ARP entry.
Figure 18 Setting static ARP
15.6 Static MAC Address Configuration
If you click Layer-2 Config -> Static MAC Config -> Static MAC List, the Static MAC Address List
Info page appears.
Figure 22 Setting Static MAC Address List Info
Click New to designate static MAC address and VLAN. The unicast MAC address can only configure
one interface. Multiple MAC addresses can configure multiple interfaces.
Click Edit to modify the static MAC address.