User's Manual

141
Figure 14: Static routing port of IGMP VLAN
When an IGMP-Snooping VLAN is created, its VLAN ID can be modified; but when the IGMP-Snooping
VLAN is modified, its VLAN ID cannot be modified.
You can click “>>” and “<<” to delete and add a routing port.
15.4.3 Static Multicast Address
If you click Static multicast address, the Setting the static multicast address page appears.
Figure 15 Multicast List
On this page, the currently existing static multicast groups and port groups in each static multicast group are
shown.
Click “Refresh” to refresh the contents in the list.
15.4.4 Multicast List
Click the Multicast List Info option on the top of the page and the Multicast List Info page appears.
Figure 16 Multicast List
On this page the multicat groups, which are existent in the current network and are in the statistics of IGMP
snooping, as well as port sets which members in each group belong to are dislayed.
Click “Refresh” to refresh the contents in the list.
Note:
By default, a multicast list can display up to 15 VLAN items. You can modify the number of
multicast items by running
ip http web igmp-groups
after you log on to the device through the
Console port or Telnet.