User's Manual
138
Global Config page appears, as shown the following Figure.
Figure 9 GVRP Global Configuration
You can enable or disable the global GVRP protocol and sets whether the dynamic vlan is only effective
on the registration interface.
15.2.2 Global Interface Attribute Configuration
If you click Layer-2 Config -> GVRP Config -> GVRP Interface Config in the navigation bar, the GVRP
Interface Config page appears, as shown the following Figure.
Figure 10 Global Interface Attribute Configuration
To enable or disable GVRP protocol on the GVRP interface configuration.
15.3 STP Configuration
15.3.1 STP Status Information
If you click Layer-2 Config -> STP Config in the navigation bar, the STP Config page appears, as shown in
figure 10.