User's Manual

130
Figure 3 Configuring the port attributes
On this page you can modify the on/off status, rate, duplex mode, flow control status and medium type of a
port.
Note:
1. The Web page does not support the speed and duplex mode of the fast-Ethernet port.
2. After the speed or duplex mode of a port is modified, the link state of the port may be switched
over and the network communication may be impaired.
14.3 Rate control
If you click Physical port Config -> Port rate-limit Config in the navigation bar, the Port rate limit page
appears, as shown in figure 4.
Figure 4: Port’s rate limit
On this page you can set the reception speed and transmission speed of a port. By default, all ports have no
speed limited.
14.4 Port mirroring
If you click Physical port Config -> Port Mirror in the navigation bar, the Port Mirror Config page appears,
as shown in figure 4-5.
Figure 4-5 Port mirror configuration