User's Manual
126
be modified by the clicking of the items in the navigation bar.
12.3.4 Bottom Control Bar
Figure 6: Bottom control bar
If you click the About button on the top control bar, the bottom control bar appears. The main function of the
bottom control bar is to realize the automatic refreshing of the configuration display area. For example, if you
click “Interface Flow” in the navigation bar and then click “Refresh”, the flow of the interface can be continuously
monitored.
After you click “Refresh”, the countdown of the next-time refresh will appear on the left side. You can modify
the countdown settings by clicking the dropdown list.
Note:
The smaller the countdown value is set, that is, the higher the frequency is, the higher the CPU
usage is.
12.3.5 Configuration Area
The configuration area is to show the content that is selected in the navigation area. The configuration area
always contains one or more buttons, and their functions are listed in the following table:
Refresh Refresh the content shown in the current configuration area.
Apply Apply the modified configuration to the device.
The application of the configuration does not mean that the configuration is
saved in the configuration file. To save the configuration, you have to click
“Save All” on the top control bar.
Reset Means discarding the modification of the sheet. The content of the sheet will
be reset.
New Creates a list item. For example, you can create a VLAN item or a new user.
Delete Deletes an item in the list.
Back Go back to the previous-level configuration page.