User's Manual

122
Chapter 12 Configuration Preparation
12.1 Accessing the Switch Through HTTP
When accessing the switch through Web, please make sure that the applied browser complies with the
following requirements:
 HTML of version 4.0
 HTTP of version 1.1
 JavaScript
TM
of version 1.5
What's more, please ensure that the main program file, running on a switch, supports Web access and your
computer has already connected the network in which the switch is located.
12.1.1 Initially Accessing the Switch
When the switch is initially used, you can use the Web access without any extra settings:
1. Modify the IP address of the network adapter and subnet mask of your computer to 192.168.0.1 and
255.255.255.0 respectively.
2. Open the Web browser and enter 192.168.0.1 in the address bar. It is noted that 192.168.0.1 is the default
management address of the switch.
3、If the Internet Explorer browser is used, you can see the dialog box in figure 1. Both the original username
and the password are “admin”, which is capital sensitive.
Figure 1: ID checkup of WEB login
4. After successful authentication, the systematic information about the switch will appear on the IE browser.
12.1.2 Upgrading to the Web-Supported Version
If your switch is upgraded to the Web-supported version during its operation and the switch has already stored