Datasheet

6
XGS-6350-48X2Q4C
Specications
Product
XGS-6350-48X2Q4C
Hardware Specications
QSFP28 Interfaces 4, each supports native 100/40 Gigabit Ethernet and 4 x 10 Gigabit Ethernet modes
QSFP+ Interfaces 2, each supports 40 Gigabit Ethernet and 4 x 10 Gigabit Ethernet modes
SFP+ Interfaces
48 10GBASE-SR/LR SFP+ interfaces
Compatible with 1000BASE-SX/LX/BX SFP transceiver
MNG 1 x 10/100/1000Base-T RJ45 port
Console 1 x RJ45-to-DB9 serial port (9600, 8, N, 1)
USB 1 x USB 2.0
LED Indicators
System:
PWRA, PWRB, Green
SYS, Green
MNG, Green
Ports:
10G SFP+ interfaces: LNK/ACT, Green
40G/100G QSFP28 interfaces: LNK/ACT, Green
40G QSFP+ interfaces: LNK/ACT, Green
Dimensions (W x D x H) 442 x 404 x 44, 1U height
Weight 8.8kg
Power Consumption 147 watts/504.3 BTU (maximum)
Power Requirements
AC 100~240V, 50/60Hz
DC 36~72V (optional)
Fan 4
Switching Performance
Switch Architecture Store-and-forward
Switch Capacity 1.92Tbps/non-blocking
Switch Throughput 1440Mpps@64bytes
Address Table 64K MAC address table with auto learning function
Shared Data Buffer 9MB
Flow Control
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Jumbo Frame 9K
IPv4 Layer 3 Functions
IP Routing Protocol
RIP v1/v2
OSPFv2
BGP (Border Gateway Protocol)
Static routing
Multicast Routing Protocol
PIM-DM and PIM-SM
PIM-SSM
Routing Features
VRRP
Policy routing
Load balance through equal-cost routing
BFD (Bidirectional Forwarding Detection) for OSPF and BGP
IPv6 Layer 3 Functions
IP Routing Protocol
RIPng
OSPFv3
BGP4+
Routing Features
Manual tunnel
ISATAP tunnel
6-to-4 tunnel
IPv6 Functions
ICMPv6, DHCPv6, ACLv6, IPv6 Telnet
IPv6 Neighbor Discovery
Path MTU Discovery
Layer 2 Function
Port Conguration
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Bandwidth control on each port
Port loopback detect