Datasheet

XGS-6350-48X2Q4C
3
– SNMP v1 and v2c switch management
– SSHv2, SSLv3, TLSv1.0 and SNMP v3 secure access
• SNMP Management
– Four RMON groups (history, statistics, alarms, and
events)
– SNMP trap for interface Link Up and Link Down
notication
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP
– Reset button for system reboot or reset to factory default
– Dual images
• DHCP Functions:
– DHCP Relay
– DHCP Option 82
– DHCP Server
• User Privilege levels control
• Network Time Protocol (NTP), SPAN, RSPAN
• Network Diagnostic
– SFP-DDM (Digital Diagnostic Monitor)
– ICMP remote IP ping
• Syslog remote alarm
• System Log
Stacking Management
• Virtualized multiple XGS-6350-48X2Q4C switches
integrated into one logical device
• Single IP address stack management, supporting up to 2
hardware units stacked together
• Stacking architecture supports redundant Ring mode
Powerful Security from Layer 2 to Layer 4
The ACL policies supported can classify the traffic by source/destination IP
addresses, source/destination MAC addresses, IP protocols, TCP/UDP, IP
precedence, time ranges and ToS. Moreover, various policies can be conducted
to forward the traffic. The XGS-6350-48X2Q4C also provides IEEE 802.1x port-
based access authentication, which can be deployed with RADIUS, to ensure
the port level security and block illegal users. Thus, the XGS-6350-48X2Q4C
empowers enterprises and campuses to take full advantage of the limited network
resources and guarantees the best performance in VoIP and video conferencing
transmissions.
Robust Layer 2 Features
The XGS-6350-48X2Q4C can be programmed for basic switch management
functions such as port speed conguration, port aggregation, VLAN, Spanning Tree
Protocol, WRR, bandwidth control and IGMP snooping. It also supports 802.1Q
tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol. In addition, the number
of VLAN interfaces is 1K and the number of VLAN IDs is 4K. By supporting port
aggregation, the XGS-6350-48X2Q4C allows the operation of a high-speed trunk
combined with multiple ports, making it an LACP link aggregation.
Efcient and Secure Management
For efcient management, the XGS-6350-48X2Q4C Managed 100Gigabit Switch is
equipped with console, Web and SNMP management interfaces.
■ With its built-in Web-based management interface, the XGS-6350-48X2Q4C
offers an easy-to-use, platform-independent management and configuration
facility.
■ The XGS-6350-48X2Q4C supports standard Simple Network Management
Protocol (SNMP) and can be managed via any standard-based management
software.
■ For reducing product learning time, the XGS-6350-48X2Q4C offers Cisco-like
command via Telnet or console port. Moreover, the XGS-6350-48X2Q4C offers
secure remote management by supporting SSH connection which encrypts the
packet content at each session.
Centralized Hardware Stacking Management
Several XGS-6350-48X2Q4C switches can be used to build a virtually logical
facility. The XGS-6350-48X2Q4C gives the enterprises, service providers and
telecoms flexible control over port density, uplinks and switch stack performance.
The XGS-6350-48X2Q4C can connect as a ring for redundancy and ensures that
data integrity is retained even if one switch in the stack fails. You can even hot-
swap switches without disrupting the network, which greatly simplifies the tasks of
upgrading the LAN for catering to increasing bandwidth demands.
Flexibility and Extension Solution
The XGS-6350-48X2Q4C provides forty-eight 10Gbps SFP+, two 40Gbps QSFP+
and four 100Gbps QSFP28 Fiber interfaces. Each of the SFP+ slots support Dual
Speed, 10GBASE-SR/LR or 1000BASE-SX/LX and each of the QSFP28 slots
supports native 100 Gigabit Ethernet, 40G and 4 x 10 Gigabit Ethernet modes.
Therefore, the administrator can flexibly choose the suitable SFP transceiver