Datasheet

XGS-6350-48X2Q4C
2
– Cisco ether-channel (static trunk)
• Supports Spanning Tree Protocol
– STP, IEEE 802.1D (Classic Spanning Tree Protocol)
– RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
– MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol,
spanning tree by VLAN)
• Port mirroring to monitor the incoming or outgoing trafc on
a particular port (many to 1)
• Loop protection to avoid broadcast loops
• Link Layer Discovery Protocol (LLDP)
• Ethernet OAM 802.3ah/802.1ag/ITU-Y.1731
Quality of Service
• Ingress shaper and egress rate limit per port bandwidth
control
• 8 priority queues on all switch ports
– IEEE 802.1p CoS/DSCP/Precedence
– VLAN ID
– Policy-based ingress and egress QoS
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• MVR (Multicast VLAN Registration)
Security
• Authentication
– IEEE 802.1x port-based network access authentication
– Built-in RADIUS client to cooperate with the RADIUS
servers
– RADIUS/TACACS+ users access authentication
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List (ACL)
– Time-based ACL
• DHCP Snooping to lter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IP Source Guard prevents IP spoong attacks
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Console and Telnet Command Line Interface
– HTTP web switch management
Rich Multi-layer Networking Protocols
The XGS-6350-48X2Q4C comes with the complete Layer 3 managed function with
comprehensive protocols and applications to facilitate the rapid service deployment
and management for both the traditional L2 and L3 networks. With support for
advanced features, including RIP, RIPng, OSPFv2, OSPFv3, BGP, BGP4+, etc.,
this switch is ideal for the traditional or fully-virtualized data center.
Strong Multicast
The XGS-6350-48X2Q4C supports abundant multicast features. In Layer 2,
it features IPv4 IGMPv1/v2/v3 snooping and IPv6 MLD v1/v2 snooping. With
Multicast VLAN Registration (MVR), multicast receiver/sender control and illegal
multicast source detection functions can be had. In Layer 3 multicast protocols, it
features PIM-DM, PIM-SM and PIM-SSM which make the XGS-6350-48X2Q4C
great for any robust networking.
Full IPv6 Support
The XGS-6350-48X2Q4C supports IPv4-to-IPv6 technologies including IPv4
manual/automatic tunnel, IPv6-to-IPv4 tunnel, and Intra-Site Automatic Tunnel
Addressing Protocol (ISATAP) tunnel. It comprehensively supports IPv6 Neighbor
Discovery, DHCPv6, Path MTU Discovery, IPv6-based Telnet, SSH and ACL,
meeting the need of IPv6 network device management and service control.
High Reliability
The key components of the XGS-6350-48X2Q4C such as management module,
power system and the fan system support redundancy design. All system modules
support hot-swap and seamless switching without manual intervention.
It supports In-service Software Upgrade (ISSU) and Graceful Restart (GR) for
OSPF/BGP routing protocol, guaranteeing the user data non-stop forwarding when
the system is upgrading. It supports Bidirectional Forwarding Detection (BFD) that
realizes fault detection and service recovery in seconds through linking with Layer 2
or Layer 3 protocol.
Excellent and Secure Trafc Control
The XGS-6350-48X2Q4C is loaded with powerful traffic management and WRR
features to enhance services offered by telecoms and enterprises. The WRR
functionalities include wire-speed Layer 4 trafc classiers and bandwidth limitation
which are particularly useful for multi-tenant unit, multi-business unit, Telco, or
network service applications.
AC Power Input
4 x Fan
Grounding
USB 2.0
RJ45 Management Port
RJ45 Type Console Backup Power Slot